Peg-Perego Duette SW - Manual (Page 11)

- 11 -
located on the rear wheels, as shown by the
arrows in the figure.
6 OPENING: activate the brake on the folded
chassis. Unfasten the tab, as in the figure.
7 Lift the handlebar in the direction of
the arrow (Fig. A). Press the handlebar
downwards until the final click (Fig. B).
8 Check that the opening is correct, as in the
figure.
9 BASKET: fasten the basket on the chassis
base, as shown in the figure, at six specific
points. Attach the four buttons, to the front
and rear, as in figures A and B; then attach
the two Velcro strips to the chassis tube, as in
figure C.
10 STEERING WHEEL: to guarantee good grip,
the steering wheel may adopt four different
positions. To adjust them, press the button as
in the figure.
11 STEERABLE WHEELS: the practical steering
wheel allows you to steer the front wheels. To
steer, move the lever on the steering wheel
to the right, as in figure A. To fix the wheels,
move the lever to the left, as in figure B.
12 EXTERNAL HANDLEBARS: the complete
chassis may be lifted using the central
external handles (Fig. A) and the rear
handlebar (Fig. B). The chassis must be lifted
by two people. Figure C shows the correct
way to lift it.
13 WHEEL REMOVAL: press down on the lever
at the centre of the wheel, as shown by the
arrow in figure A, and simultaneously pull the
wheel towards you (Fig. B).
14 FOLDING: activate the brake and release the
seats. To fold the chassis, lift the lever on
the handlebar (Fig. A), thus detaching the
handlebar, and move it slightly forwards (Fig.
B). Push down on the safety lever with your
left foot (Fig. C) to release the handlebar.
15 Rotate the handlebar downwards (Fig. A).
Fold the chassis, attaching the tab to the
handlebar fastener (Fig. B).
GANCIOMATIC SYSTEM
Ganciomatic is a fast and practical system
that allows you to attach the Primo Giro
carrying chair, the Primo Viaggio SIP car seat
(sold separately) to the Ganciomatic Base in
one step.
Place the item on the Ganciomatic Base and
push down with both hands until you hear a
click.
Always activate the chassis or stroller brake
before attaching or removing products (refer
to the respective instruction manuals).
Follow the instructions for the product
combinations.
16 DUETTE + 2 CARRYING CHAIRS
WARNING: to maintain product stability,
always attach both carrying chairs. If for any
reason Duette SW is used for only one child, fit
both carrying chairs anyway and ensure that
they are properly attached. Figures A, B, C and
D show the attachment options for the chairs.
Figure D shows the “cot” position, obtained
by reclining the backrests and lifting the
footboards, as in the figure.
17 DUETTE + 2 PRIMO VIAGGIO SIP CAR SEATS
Figure A shows how to attach the product
(facing the person pushing).
18 DUETTE + 1 PRIMO VIAGGIO SIP CAR SEAT
AND 1 CARRYING CHAIR
WARNING: to maintain product stability
always attach the carrying chair. If for any
reason Duette SW is used for only one child,
fit the carrying chair anyway and ensure that
it is properly attached. Figures A and B show
how to attach the products.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged
and continuous exposure to bright sunlight
may give rise to colour changes of various
different materials; store this product in a dry
place.
CLEANING THE CHASSIS: periodically clean all
plastic parts with a damp cloth. Do not use
solvent or similar cleaning products; keep
all metal parts dry to prevent rusting; keep
moving parts clean (adjustment mechanisms,
locking mechanisms, wheels, ...) and free of
dust and sand and, if necessary, lubricate with
light machine oil.
PEG-PÉREGO S.p.A.
Peg Pérego can make changes at any time to
the models described in this publication for
technical or commercial reasons.
PEG-PÉREGO AFTER-SALES
SERVICE
If any parts of the item get lost or damaged,
only use genuine Peg Pérego spare parts.
For any repairs, replacements, information
on the products and sales of genuine spare
parts and accessories, contact the Peg