Peachtree Audio Grand Integrated - Manual (Page 11)

‡ &RD[LDO 'LJLWDO ,QSXW For connecting the coaxial output from any digital
source, using a coaxial digital cable. Push the “COAX” input button on the front
of the Grand Integrated to listen.
‡ 2SWLFDO 'LJLWDO ,QSXW VRPHWLPHV FDOOHG 7RVOLQN For connecting the
optical output from any digital source, using an optical digital cable.
Push the “OPT” input button on the front of the Grand Integrated to
listen.
‡86%'LJLWDO,QSXWFor connecting the USB output from a computer (or other
VRXUFHFRPSRQHQWZKLFKFDQRXWSXWDXGLRYLD86%XVLQJD86%FDEOH3XVK
the “USB” input button on the front of the Grand Integrated to listen.
BNC Digital Input: For connecting a professional sound card to the Grand Integrated.
This is a 75 ohm connection that requires a special interconnect cable. Push the
BNC input button on the front panel
Aux Inputs: )RUFRQQHFWLQJDQDORJLQSXWV&'SOD\HU7XQHU3KRQRSUHDPSXVLQJ
RCA interconnects. Aux input buttons are on the front panel, so push the one that
corresponds to the Aux input you’re using on the back panel.
Speaker Terminals: For connecting high quality speaker wire to your speakers.
Please be sure your connections are “In-Phase” (positive on the Grand Integrated
FRQQHFWVWRSRVLWLYHRQWKHVSHDNHUVDQGQHJDWLYHFRQQHFWVWRQHJDWLYH
Preamp output: For connecting the variable preamp output of the Grand Integrated
WRDQDPSOLÀHU7KHOHIWDQGULJKWFDEOHVVKRXOGFRQQHFWWRWKHOHIWDQGULJKWLQSXWV
of the power amp.
‡/LQH2XWSXWÀ[HGFor connecting the Grand Integrated’s left and right line out
MDFNV WR OLQHOHYHO $8; LQSXWV RQ D SUHDPSOLÀHU LQWHJUDWHG DPSOLÀHU RU UHFHLYHU
Select any connected digital source from the front panel of the Grand Integrated or
from the Grand Integrated remote control. Set your listening level using your existing
system’s volume control.
WARNING: DO NOT CONNECT A FIXED-LEVEL LINE OUTPUT TO A PHONO
INPUT OR DIRECTLY TO THE INPUTS OF A POWER AMPLIFIER. YOU MAY
DAMAGE YOUR PREAMPLIFIER, RECEIVER, POWER AMPLIFIER AND
SPEAKERS!
Connections
8
Grand Integrated