Paradigm Soundtrack System - Manual (Page 8)

WALL MOUNTING
What’s Included
2 x Wall-Mounting Brackets
1 x Wall-Mounting Template
Recommended Tools (not included)
1 x Stud Finder
1 x Level
1 x Electric drill and appropriate drill bits
1 x Phillips Screwdriver
Recommended Hardware (not included)
4 x Screws to suit mounting surface and weight of soundbar.
4 x Wall anchors to suit mounting surface and weight of soundbar.
(NOTE: Soundbar weighs 7.35 lb / 3.34 kg)
Mounting Steps
Step 1
Establish desired mounting location.
Step 2
Lightly tape the supplied Installation Template to the wall in the correct
position, using a level for accuracy. Mark the locations of the two screws
on the wall. (Fig. 3)
Step 3
Using a stud finder, determine if
there is a wall stud directly behind
the chosen location. (Fig. 4)
5
Fig. 3
Paradigm does not supply screws and anchor bolts
to mount your soundbar to a wall. Although we do
provide limited instructions for wall mounting, you must
contact a Paradigm Dealer for more information. The
subwoofer is not designed to be wall mounted.
The instructions that follow assume the mounting
surface is standard wood studs. Should you wish to
mount to another type of surface you must consult
a certified contractor.
Fig. 4
FINAL_SoundtrackManual_ENG_FRE_SPA_READER_SPREADS.indd 5 12-10-12 12:01 PM