Paradigm MilleniaOne CT - Manual (Page 2)

3 4
1
4
4
4
4
1
5 5
Connect Subwoofer Connect Control Box
Analog connection to TV
(use for good audio)
2
3
5
Your subwoofer’s LEVEL switch is set to 12 o’clock
to suit average preferences. If desired, adjust up or
down to match sound level of your speakers.
Digital connection to TV
(use for best audio)
TIP: If after set-up and
“power on” you do not hear
audio, press the “input”
button on the remote.
Connect controller cable to
subwoofer and to control box
(+) to (+),
(–) to (–)
Connect power cable to
subwoofer and to wall outlet
Top View
Side View
BEFORE YOU BEGIN, READ THE SAFETY PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS INCLUDED IN THE OWNERS MANUAL.
OPTIONAL:
Connect digital
output cable
Paradigm DOES NOT supply hardware for
mounting brackets to the wall. Use 2 #8 1- 1 /
2
”
wood screws to mount the wall bracket to the wall.
Mount bracket to wood stud or use anchor bolts
rated for 20 lb weight.
On Stands: Adjust
angle of tilt, if desired
Wall-Mounting
Adjust On-Wall Angle
of Tilt, if desired To Use Control Box
with Apple TV
For further instructions, refer to your Apple TV
Set-Up Guide.
Adjust Subwoofer Loundness
A D B C
Tighten knob before
sliding into bracket
5
Squeeze here (both
sides) to allow bracket
to slide snugly
Attach Speakers to Stands
1
2
Press down on binding
post to allow wire access.
Left cable to left speaker.
Right cable to right speaker.
DO NOT pinch wires when
attaching speakers to stands
NOTE: Pre-attached wall mounting
brackets must be removed in order
to attach stands
NOTE: Choose analog
OR digital connections
Tighten knob
to secure stand
Wire Speakers
THIS PART TOLERANCE GRADE:
4
DIM
DIMENSIONAL TOLERANCE UNLESS OTHERWISE SPECIFIED
5
GAIN
+
BASS
–
BASS
4