P.I. Engineering XK-12 Jog & Shuttle - Manual

XK-12 Jog & Shuttle
Product Manual
Model XK-0982-UAG12-R
12 Keys + Jog Wheel and Shuttle Ring
Individual Key Backlighting
Designed, Sold, and Supported in USA
From P.I Engineering, The No Slogan Company
www.xkeys.com
Box Contents
This package contains:
1- X-keys XK-12 Jog & Shuttle
1- Installation CD
1- Replacement key set (2 tall, 1 wide, 1 key puller)
2- Angled feet
2- Legend Sheet (1 pre-printed, 1 blank)
1- Product Manual
Quick Start for Windows
1.
Run the MacroWorks 3 (MW3) installation program from the enclosed disc.
2.
Plug in the X-keys and wait for Windows to recognize it.
3.
Press the programming switch (located on the top edge of the X-Keys) to
open the MW3 programming window (or click on the MW3 taskbar icon and
select the device).
4. Press any key on the X-keys (or double-click on the key image) to begin
recording a macro.
5.
Type keystrokes or select text, shortcut, or function. Multiple lines of
keystrokes, text, shortcuts, and functions may be entered on a single key.
6. Press the key again (or click Save) to complete programming.
7. When finished, press the programming switch again to close the
programming window.
To quickly learn how to use MW3 watch the brief tutorials on the disc or on our
website. Consult the MW3 help file for complete instructions and tips on
programming and using your X-keys.
Mac Users
Install ControllerMate for X-keys from the enclosed disc or visit the Apple page
in the Software section of our website for a free download. ControllerMate for
X-keys is published by OrderedBytes in partnership with P.I. Engineering. For
full programming instructions and support, please visit
www.orderedbytes.com/controllermate/.