Features, Tent setup – NEMO Equipment GOGO E User Manual
Page 4
Features
2. Getting in and out of Gogo EX™ is made easy by your choice of
two doors. If you have gear inside the tent blocking the main
front entry, use the side door. Or if you've stored gear under the
rain fly on the side of the tent, you can use the front door. Note
that the side door has a removable welcome mat to help keep
you and your stored gear out of the mud.
3. To tension Gogo EX™ and keep the bivy off your sleeping bag,
break a stick to the correct length to fit between the Swallowtail
pockets. NOTE: It is safest to use a thin or flexible stick in case
someone should trip and fall on the bivy. The length of the
stick should be about 17.25" long if the fly is not attached and
19.5" long if the fly is attached. Please note that if your rain fly is
attached, use one stick from the bottom pocket on the inner tent
to the Hypalon® pocket on the fly.
1. To create an open front vestibule, unhook the front anchor
from its stake. Press on the side release buckle to release the
inner tent from the ExoFly™. Re-stake the tent using the metal
ring on the ExoFly™ instead of the one on the inner tent. Retract
the inner tent to create as much space as you need. You can clip
and unclip from inside the tent by reaching through the front
mesh zipper.
1
3
2
2
1. When choosing a location to pitch your tent, select a flat area
free of fragile undergrowth and sharp objects. Anchor the
corners of the tent to the ground with the included stakes. If you
are forced to set up your tent on an incline, make sure your head
is positioned uphill. If the ground is too hard to place stakes, tie
the corners of your tent to heavy objects like rocks.
2. Find the airbeam valve inside your tent and disconnect the
deflator cap. Connect your Integrated Pump to the inflation
valve. When properly connected, the quick-disconnect fittings
will make an audible click.
3. To use the Integrated Pump, first make sure the Universal
Inflation Port on top of the pump body is closed. Blow into the
pump through the mouthpiece, and squeeze the pump body
with your hand or under your foot. Repeat this sequence, being
sure to frequently inhale.
4. If rain isn’t in the forecast, leave the fly unattached. If necessary,
attach the fly to the tent using the four plastic buckles. Stake out
the side vestibule and tension the anchor.
5. Use the ladder lock buckle to adjust the length of the front
anchor. When your anchor is properly adjusted, you will be able
to use one stake placement to secure either the inner tent or the
ExoFly™. In sunny weather use the blue anchor. In rainy or
questionable weather, use the grey anchor.
Tent Setup
2
3
5
4