Instructions for setup, Series – NEMO Equipment TUO CUB User Manual

Page 2

With both valves closed, lay on the pad to test the comfort. Add or release air from the
top layer to adjust the firmness of the pad. Leave the base layer firmly inflated for
maximum protection from rocks and roots.

Open Valves

Open both valves on your Tuo™ sleeping pad and lay it out flat. The longer you leave
the pad with its valves open, the more it will partially self-inflate.

Packing Away

To deflate, open the valves and roll out as much air as possible. Then close both valves,
unroll the pad and roll pad again, opening valves again as you finish rolling. Close the
valves once air has escaped, and insert the pad into its stuff sack.

Repair

To repair a leak, first clean and dry damaged area. Submerge the inflated pad in water
to help locate leaks. With pad deflated, adhere a fabric patch from the repair kit using a
urethane-based adhesive. This type of adhesive, such as Seam Grip® or Aquaseal®, can
be found at your local outdoor store. Spot clean pad with mild soap and water.

Using your mouth or the Disco™ Pump, inflate the base layer of the Tuo™ pad until
it becomes difficult to add more air. Twist both valves closed.

Remember to leave no trace. Before leaving your campsite take a thorough look
around making sure you have not left anything behind, out of place, or damaged.

To contact NEMO Customer Service

Email: [email protected]

Phone: 800-997-9301

TUO

™

SERIES

Inflate Base Layer

Adjust Firmness

INSTRUCTIONS FOR SETUP