Instructions for setup, Pillowtop – NEMO Equipment PILLOWTO User Manual

Page 2

Insert Sleeping Pads

Expose Valves

There are openings for the foot pump, adjustment valve, and dump valve on
Cosmo™, and inflate/deflate valves on the Tuo™, Astro™ and Zor™. Make sure the
appropriate hardware is exposed for inflation. Inflate pad to desired firmness.

Unroll Pillowtop™

Remove Velcro® packing strap and unroll Pillowtop™. The microfiber side should
face up and the black fabric should face down.

Removable Foam

The comfort foam layer of the Pillowtop™ is removable just like the air-filled pads.
Simply untie the small straps at each corner of the foam, and pull through the opening
at the end of the pad.

Packing Away and Care

Leave your pad inside Pillowtop™ when packed away. For Cosmo™ pads, close foot
pump valves and open dump valve. For other sleeping pads make sure both valves are
open. Fold in half and roll along the long edge, closing all valves when finished.
Machine wash cold, tumble dry low. Remove comfort foam prior to washing.

Insert sleeping pad through the velcro opening (or foot pump opening) in the the
Pillowtop™. Make sure the pad is beneath the foam layer and the microfiber top
covers the top of the sleeping pad.

Remember to leave no trace. Before leaving your campsite take a thorough look
around making sure you have not left anything behind, out of place, or damaged.

To contact NEMO Customer Service

Email: [email protected]

Phone: 800-997-9301

PILLOWTOP

™

INSTRUCTIONS FOR SETUP