NEMO Equipment ASTR AIR SHORT - Manual (Page 2)

Inflate
Adjust Firmness
With the valve closed, lay on the pad to test the comfort. Add or release air to adjust the
firmness of the pad.
Insert into Pillowtop™ [optional]
If using with a Pillowtop™ cover, insert Astro Air™ through the Velcro® opening.
Make sure the pad is beneath the foam layer and the microfiber fabric covers the top
of the sleeping pad. Pull the inflation valve through the opening in the Pillowtop™.
Packing Away
To deflate, open the valve and roll out as much air as possible. Unroll pad, fold edges
towards the center to reduce pack size, and roll again. Close the valve once all air has
escaped , and insert the pad into its stuff sack.
Repair
To repair a leak, first clean and dry damaged area. With pad deflated, adhere a fabric
patch from the repair kit using a urethane-based adhesive. This type of adhesive, such
as Seam Grip® or Aquaseal®, can be found at your local outdoor retail store.
To open the valve, twist counter clockwise and pull. Use your mouth or Disco™ Pad
Pump to inflate the pad until it is difficult to add air. Twist the valve clockwise and
push to close. [Hint: Push the valve in at any point during inflation to prevent air
loss.]
Remember to leave no trace. Before leaving your campsite take a thorough look
around making sure you have not left anything behind, out of place, or damaged.
To contact NEMO Customer Service
Email: [email protected]
Phone: 800-997-9301
©2011 NEMO Equipment, Inc.
ASTRO ™ SERIES
1
2
3
4
5
®
INSTRUCTIONS FOR SETUP