NEMO Equipment MORPH 2P - Manual (Page 4)

Crossbow-style side vents are easy to deploy from
inside the tent. Located on both sides of the tent for
cross-flow ventilation, these waterproof vents can
stay open even in the most driving rain.
The Boot Cut™ shields two pairs of shoes or a small
pack from the rain. This protected area adds versatil-
ity without compromising your tent living space.
The UVX window on the vestibule is non-yellowing,
non-clouding, UV resistant, and allows you to check
conditions without exposure to the elements.
A Light pocket™ diffuses light from your headlamp
to cast an even glow throughout the tent.
oSMo™ is a 40D high tenacity polyester ripstop
with a hydrophobic microporous PU coating. The
polyester is naturally UV-resistant and doesn’t sag
when wet. OSMO™ is highly durable, lightweight,
and abrasion-resistant.
A watertight dry bag protects your tent from
taking on water weight if stowed in your backpack
while hiking in the rain, or a kayak hull when you
roll your boat.
Spare bladders are available for all AST® models.
The Integrated pump features durable welded
construction, a Moisture Release Valve™, and a
quick-disconnect valve for easy setup.
Footprints reduce the wear and tear on your tent
floor from contact with the ground. They are made
of 70D abrasion-resistant nylon fabric and sized to
your tent. The fabric is PU coated for waterproofness.
pawprints™ button snap to the inside corners of
your tent. They protect your tent floor from boots
and paws, and add serious comfort. Made of soft
brushed polyester.
padlocks™ are a simple strap system to keep sleep-
ing pads secured in place during the night.
Morpho™ 2p ACCESSorIES