Instructions for setup, Gogo, Elite – NEMO Equipment GOG ELITE User Manual

Page 5

INSTRUCTIONS FOR SETUP

Remember to leave no trace. Before leaving your campsite, take a thorough look
around making sure you have not left anything behind, out of place, or damaged.

To contact NEMO Customer Service

Email: [email protected]

Phone: 800-997-9301

GOGO

™

ELITE

Connect Pump

Connect the black valve end of your Integrated Pump to the
airbeam inflation valve. You should hear an audible click when
your pump is connected properly.

Stake Corners

Secure the anchors by pounding the stakes into the ground
with a rock or hard object. If the ground is too hard, tie the
anchors to a rock or another heavy object.

Inflate Airbeam

To inflate the Gogo™ Elite airbeam with the Integrated Pump,
repeat the sequence of blowing into the mouthpiece and
squeezing the fabric pouch until squeezing becomes difficult.

Tension

Proper tension ensures maximum water shedding and wind resistance.
Once the airbeam is inflated, pull firmly on the adjustable anchors. Add
a stick to the Swallowtail end of Gogo™ Elite for better tension and venting.

Locate the black Inflation Valve with protective red cap. If the Deflation
Cap is connected, remove by pressing the button and pulling. During
takedown, reconnect the Deflation Cap to aid in quick deflation.

Locate Valve on Airbeam