beautypg.com

Directed Electronics AS-1775 User Manual

Page 9

background image

User guide

P.9

Turn the ignition key to the IGNITION ON (RUN) position.

Press and hold the button until the parking lights come ON for 2 seconds, pause,
and then flash once.

If Safe Start is enabled, you can activate Cold Weather Mode by:

Pressing and releasing the button, then, pressing and holding the button until the
parking lights flash 3 times.

To verify whether the system is in Cold Weather Mode (automatic transmissions only):

Press the brake pedal:

If the vehicle is in cold weather mode, the parking lights will remain ON while the

brake pedal is pressed.

Extended Run Time  

With the vehicle running under a remote start, pressing and holding the button for more than 3
seconds will reset the run time counter to zero and restart the run time cycle from the beginning.

The horn (if programmed) will honk once;

The parking lights will flash slowly 3 times then remain lit.

To stop the vehicle at any moment, simply press the STOP button. This procedure can only be
carried out once per remote start.

Example:
If your Module is programmed for a runtime of 3 minutes and your vehicle has been
running for 2 minutes already, pressing the button will reset the counter to zero and the Engine
will run for another cycle (in this case, 3 minutes).

Disable/Enable LED flashing 

To disable the LED: Press

and

simultaneously until the parking lights flash three

times.
To Enable the LED: Press

and

simultaneously until the parking lights flash once.

Constant output  

• Pressing and holding the button for more than 3 seconds will lock all doors and will
send a constant pulse as long as the

button is held down (maximum of 15 seconds).

This constant pulse can be configured to activate certain functionalities such as rolling up
the windows – Please refer to your installer to see if your vehicle is compatible with
this

option.

• Pressing and holding the button for more than 3 seconds will unlock all doors and will
send a constant pulse as long as the button is held down (maximum of 15 seconds).
This constant pulse can be configured to activate certain functionalities such as rolling
down the windows – Please refer to your installer to see if your vehicle is compatible
with this option.