DeLonghi 6708EK - Manual (Page 3)

3
FITTING THE WHEELS
Remove the feet with the bracket wheels from the polystyrene packing.
Turn the radiator upside-down and have it rest on the polystyrene.
Fit the wheels to the spindles on the feet and push firmly until they click into position.
The feet with the casters must be fitted with two arc-shaped brackets only between
the 1st and 2nd element and the second to last (see fig. 1 to 3 inclusive).
HOW TO USE YOUR HEATER
fig. 1
fig. 2 fig. 3
MODELS WITH “EASY WHEEL”SYSTEM
Turn the radiator upside-down on a rug or a soft surface in order to prevent dama-
ging the paint finish. Fully unfold the castors by turning them outwards (Fig. 4).
Turn the radiator back to its upright position.
1. LOCATION
Place heater on floor beneath coldest window in the room or any desired location.
Your heater will minimize the effect of cold drafts.
The heater must not be located immediately below a socket-outlet.
Do not use this radiator in rooms having a surface area less than 4 m
2
(43 sq. ft.).
2. POWER CONNECTION
The radiator must be connected to a properly polarized A/C 110/120 V household
outlet in perfect working condition.
Keep loose clothing or bedding, furniture and flammable material away from the
wall outlet where the heater plug is fitted in.
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
fig. 4