Safety precautions, Specifications, Counting procedures – LW Measurements WPB 33 Water Proof Balance User Manual
Page 2
SAFETY PRECAUTIONS
All safety messages are identified by the following the words "WARNING" and
"CAUTION". These words mean the following:
When using the scale/balance, the following safety precautions should always
be followed.
△ WARNING
Use only the AC adaptor with the scale/balance. Other adaptor may cause
damage.
△ CAUTION
Avoid installing the scale/balance in direct sunlight, this may cause
discoloration or malfunctions.
Keep scale in room temperature, away from hot temperature.
Avoid shock impact and loading over capacity. Do not keep heavy
object permanently on the platform.
If scale is not used for an extended period, keep it clean and stored in
plastic package.
Matter charged static electricity would influence the weighing.
1
SPECIFICATIONS
Model number
Capacity
Division
WPB -6000
6000g/13lb
0.2g/0.01oz
WPB -15000
15000g/30lb
0.5g/0.02oz
Platter
210x160mm
Net/gross weight
3100g/3500g
Package
Standard carton: 31.5Ч27.5Ч21.5(cm
3
)
4 Units in one box: 65Ч56Ч24(cm
3
)
Operating Temperature
0-40
℃(32-104℉)
Power source
Recharge battary or AC/DC
Adapter 10~12V/500mA
Counting procedures
1.
Press [ON/OFF] to turn on the scale.
2.
Wait for "0" to appear on the display.
3.
If necessary, press [ZERO]
key to set the display to “0”
4.
Press the [PCS] key to put the scale in PCS mode. ,the display
will show P=X X
5.
Press the [PCS] key to select XX value (10, 20, 50, 100)
6.
Place a given number of samples of an item on the pan (the
Sample Size should be either 10, 20, 50 or 100 pieces).
7.
Press [UNIT] key to accept sample quantity,the display
will show PASS.
8.
Start counting by adding weight on the scale.
9.
Press [UNIT] key to return to the weighing mode.
6
△WARNING
Important information to alert you to a
situation that might cause serious injury
and
damage
to
your
property
if
instructions are not followed.
△CAUTION
Important information that tells how to
prevent damage to equipment.