LW Measurements SPS 75 - Manual (Page 4)

HOLD FUNCTION
Once the HOLD key is pressed, the weight will remain on the display for
120 seconds after the item has been removed from the scale so the weight
can easily be read.
1) Place the item on the scale platform.
2) Wait for the stable weights to be displayed.
3) Press the HOLD
key. The “HOLD” hold indication will turn-on.
4) Remove the item from the sca le platform. The item’s weight will remain on
the display for 120 seconds. You can now also convert this to other
measures (example: lb or kg) by pressing the UNIT key
5) To quit HOLD function, press the HOLD key again.
FUNCTION SETTINGS
1. With the scale in OFF position, press and hold the HOLD key and turn on
the scale by pressing ON/OFF key. The display will show
A_ON or A_OFF.
2. Auto shut off mode.
Press the [ZERO] key, the display will show A_ON or A_OFF. A_ON
means the auto shut off function is active. Press [ZERO] again, the display
will show A_OFF, this means the auto shut off function is inactive.
3. Auto backlight mode.
Press [HOLD] key, the display will show L_ON or L_OFF, press [ZERO],
selection display L_ON, this means backlight function active, press [ZERO]
again, the display will show L_OFF, this means backlight function inactive.
4. Selection of auto HOLD mode.
Press [HOLD] key, the display will show H_ON or H_OFF, press [ZERO],
selection display H_ON, this means AUTO-HOLD function active （
The
weight must be more than 2 lb ） , press [ZERO] again, the display will
show H_OFF, this means AUTO-HOLD function inactive.
5. Return to weighing mode.
Press [ON/OFF] to turn the power off, press [ON/OFF] again to turn on the
power and the scale will return to weighing mode.
3
WEIGHING
Whenever possible, please allow the scale to warm up for several seconds after
first turning the power on so that the scale will function properly and accurately.
Error messages
Err-O: Overload
Lob: Low battery
Weighing Procedures
1.
Press ON/OFF to turn on the scale. The display will show “HELLO” for a
few seconds and “0” will appear on the display.
2. Select the weighing unit by pressing “UNIT” key.
3. The selected unit will be display on the cursor next to the weight value.
4. Start weighing. Make sure the display is “0”, if not press the “ZERO” key
to zero the scale.
5. If you are using a container or tray, place the empty container on the scale;
wait for the stability indicator to be displayed, press “ZERO”, the display will
read “0” with the tray or container on top.
6. Place your objects to be weighed on the container. The weight will be
displayed once the scale is stable.
4