Safety precautions, Specifications – LW Measurements SC 76 User Manual
Page 2

SAFETY PRECAUTIONS
All safety messages are identified by the words "WARNING" and "CAUTION".
These words mean the following:
△!WARNING
Important information to alert you to a situation that
might cause serious injury and damage to your
property if instructions are not followed.
△!CAUTION
Important information that tells how to prevent damage
to the equipment.
When using the scale, the following safety precautions should always be
followed.
△! WARNING
Use only the correct AC adaptor with the scale. Other adaptors may cause
permanent electrical damage.
△! CAUTION
Avoid placing the scale in direct sunlight, this may cause discoloration or
malfunction.
Replace all batteries at the same time
– Do not replace only a portion of the
batteries as this may cause a malfunction.
If the scale is not to be used for a long period of time, remove all batteries from
the battery compartment to avoid leakage, which may cause damage to this
scale.
Avoid overloading the scale, as this may cause permanent damage and void
your warranty
– do not EVER exceed the maximum capacity of the scale. Keep
the scale away from water
– this scale is not water resistant. Shock, injury and
electrical damage can occur if used in a wet location!
1
SPECIFICATIONS
Model
Capacity
Division
SC-36
36lb/17kg
0.1oz/2g
SC-56
56lb/26kg
0.2oz/5g
SC-76
76lb/36kg
0.2oz/5g
Platter / Tray
200×160mm
Net/gross weight
840g/1070g
Package
Standard carton: 220x300x75(mm
3
)
20 Units in one box: 45x61x40(cm
3
)
Operating Temperature
Optimum: 0-40℃C (32-104℉) F
Power source
3×AAA Size Batteries or AC/DC
Adapter 6V/100mA (optional)
**SPECIAL WARNING**
Cell-Phones, Cordless-Phones, and any radio-frequency device can cause
temporary interference and cause the scale to temporarily not work properly.
Please do not use any electronic device near the SCALE. Just like in an
Airplane, do not use your cell-phone near the scale when it is in use. While
there is NO risk of permanent damage to the scale, interference can cause an
incorrect calibration or incorrect weight readings.
6