LW Measurements MCT 66 - Manual (Page 15)

15
The power adapter produced for the operation of the weighing machine and
intended exclusively for this application complies with the appropriate electrical
protection class.
2.3 Data and parameters
2.3.1 Technical data
The following applies to all MCT PLUS series weighing machines:
Power supply:

Input: 110 or 230V AC (+/-15-20%); 50 to 60Hz

Output: 10v DC 500mA
Allowable ambient conditions:

Temperature: 0°C - 40°C / 32 - 104ºF

Relative humidity: 25% - 85%, non-condensing
If you have any questions on the technical data or require detailed technical
information on your balance, please contact your technical representative.
3 Getting started with your weighing machine
3.1 Unpacking the equipment
The machine is delivered in an environmentally-friendly carton, specifically
developed for this precision instrument, which provides optimum protection for
the unit during transportation.
We suggest that you retain the original packaging in order to avoid
transportation damage if re-shipping or transporting the balance, and to allow
the unit to be stored in the best conditions if it is out of operation for an
extended period.
In order to avoid damage, attention must be given to the following points when
unpacking the balance:
Unpack the weighing machine carefully. It is a precision instrument.
When outside temperatures are very low, the balance should first be stored for
some hours in the unopened transport package in a dry room at normal
temperature, so that no condensation settles on the unit when unpacking.