LW Measurements HRB 1002TL - Manual (Page 19)

19
4.2.3 Pieces counting

Press [ON/OFF] to turn on the Balance, wait for “0” to appear on the display

If necessary, press [ZERO] key to set the display to “0”

Press [PCS] key to enter PCS mode, display will show P = XX

Press [UNIT] key to select XX value ( 10, 20, 50 or 100)

Place a given number of samples of one item on the pan, the sample size should be 10, 20, 50 or
100 pieces.

Press [PCS] key to confirm sample quantity

Start counting by adding weight on the Balance

Press [PCS] key to return to the weighing mode