Luxul XMS-1024 - Manual (Page 4)

Quick Install Guide XMS-1024
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XMS-1024 0829140311
4
The green LED indicators show the working status of the switch. The following
table describes the LED functionality:
Indicator
Name LED Description
Power On This LED indicates that there is power to the XMS-1024
Off If LED is off, check power connections..
Link/Act On The Link/Activity LED of the port will be on if there is a
device connected to the port.
Flashing The Link/Activity LED flashes when a port is receiving
or transmitting data.
Off There is nothing connected to the port.
1000
Mbps On The 1000 Mbps LED will come on if a device capable of
1000Mbps is connected to the port.
Off If a port has no device connected or it is not a 1000
Mbps capable device, the 1000 Mbps LED will be off.
SYS Flashing Indicates that the XMS-1024 is running normally.
On Indicates a malfunction, contact technical support.
Off Indicates that the XMS-1024 is in startup and initializa-
tion process or is not on.
At startup, port LEDs will flash for 1 second as a self test.
When a 1000 Mbps SFP optical interface is in use, the 1000 Mbps LED and the Link/
Activity LED of the corresponding Ethernet port are both on to indicate the SFP
status. When a 100 Mbps SFP optical interface is in use only the Link/Activity LED
of the corresponding Ethernet port on to indicate the SFP status
Rear Panel
100-240V
-50/60Hz 0.5A
XMS-1024 Rear Panel View
Power Input: Please use the included power cable