Luxul XWR-600 - Manual (Page 6)

Quick Install Guide XWR-600
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XWR-600 0828141127
6
PREPARING FOR INSTALLATION
System Requirements
„
Computer supporting TCP/IP and equipped with a Web browser. Supported Web
browser versions include I.E. 9.0, Firefox 3.6, Safari 5.0, Chrome 6.0, Opera 10.6
and up. The Web browser is used to configure the XWR-600.
„
Power must be AC 100-240V~ 1.0A 50/60Hz.
XWR-600 INSTALLATION
Desktop Installation
For use as a desktop device, position the XWR-600 on a desk or other horizontal
surface with adequate room around the XWR-600 for ventilation.
Wall Installation
The XWR-600 Is keyholed to allow installation on a wall or ceiling. Use the
Mounting Pattern (Page 8-9) for keyhole alignment.
Hardware Setup
„
Attach Antennas: Connect the included Dual Band Antennas to both
antenna ports.
NOTE: Both antennas should be installed prior to powering up the
XWR-600 and are required for optimal performance.
„
WAN Connection: Connect the Ethernet cable from the modem/router equip-
ment provided by your Internet Service Provider (ISP) to the black WAN port of
the XWR-600.
„
AC Power: Connect the included AC Adapter to the XWR-600 first and then to
the AC outlet.