Danby DMW1148SS User Manual
Page 11
C. Notes on setting the clock.
l
If YOU MAKE A MISTAKE in setting the correct
time, start oven by pressing the CLOCK pad
twice.
l
TO RECALL TIME OF DAY WHILE YOU ARE
COOKING, press the CLOCK pad. Time of the
day will be displayed for 3 seconds before
returning to displaying the counting down of the
cooking time.
l
IN CASE OF POWER FAILURE, when the power
has been restored, the control will be in a clock
set mode. Follow the directions for setting the
clock.
l
BEEPS DURING OVEN SETTING ONE BEEP:
Oven accepts the entry. Information has been
entered in the correct sequence. TWO BEEPS:
Oven does not accept the entry. Check and try
again.
2. SETTING THE OVEN TIMER
A. Timer works independently of cooking and can be
set anytime for various kitchen tasks. Use oven
timer though oven is also timing a microwave
cooking function. Set time as follows:
l
Touch the TIMER pad. Word prompts ENTER
TIMER TIME show on the display. If you are
using the TIMER while cooking in the oven:
Cooking time countdown will be temporarily
replaced on the display while timer is being set.
l
Enter the amount of time you wish to set by
touching the correct number pads. Digit time is in
minutes and seconds and set left to right. Set one
digit (a 5 for 5 seconds) or up to four digits (2405
for 24 minutes, 5 sec-seconds). ENTER TIMER
remains on the display.
l
Touch START/STOP pad. Word prompt TIMER
starts flashing and timer countdown can be seen
on display for 3 seconds before cooking time is
returned to display. Word prompt TIMER is
displayed alone with additional word prompt
indicating current cooking mode.
B. Notes on setting the oven timer.
l
To STOP OR RESET TIMER when cooking is not
taking place, touch RESET pad.
l
WHEN SETTING TIMER DURING A COOKING
OPERATION take care to set timer correctly.
Once the timer is set during cooking, setting
cannot be changed without resetting the cooking
function at the same time. Touching RESET will
not allow you to change timer setting while
cooking.
l
When end of time has been reached, one long
beep can be heard and timer will leave the
display. If oven is not cooking, CLOCK and time
of day (if set) will return to the display. If oven is in
cooking operation, one long beep can be heard
and TIMER will leave display while oven is
continuing cooking time countdown.
3. SETTING THE COOKING TIME & POWER
LEVEL
A. QUICK & EASY
When cooking at 100% power, simply set cook
time by touching number pads (for example, 3
minutes: touch 3-0-0) and START. 100% power is
automatically set. For 1-step cooking, you do not
have to touch COOK pad before setting time.
B. TO COOK AT LOWER POWER LEVELS
After setting cook time, touch POWER pad then
single digit representing the power level desired.
Touch START pad. Since oven automatically
assumes 100% power, you must switch power
level (when desired) after setting cook time.
USE THESE SINGLE DIGITS TO
REPRESNET POWER LEVELS
Digit % of Power
9 90%
8
80%
7
70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
.
8