Lingenfelter L460050000 Lingenfelter STOV-002 MPH Activated Switch v3.5 - Manual (Page 3)

Page 2 of 12
Specifications:
· The Lingenfelter Performance Engineering STOV-002 Speed To Voltage Convertor and MPH
Activated Switch incorporates a precision 32-bit timer to realize microsecond precision over a very
wide operating MPH range.
· Designed to work with most late model vehicles that have a 2000, 4000, 8000 or 10,000 pulse per
mile (PPM) vehicle speed output from the ECM/PCM including:
· 1997-2013 Corvette (C5 and C6)
· 1998-2002 LS1 Camaro and Firebird
· 2010-2013 Camaro
· 2004-2006 GTO
· 2003-2006 SSR
· 2006-2008 Trailblazer SS and other 5.3 and 6.0L S/T trucks
· 1999-2008 CK trucks (Tahoe, Yukon, Escalade, Sierra, Silverado)
· Fully encapsulated (potted) construction for increased durability.
· Custom molded high temperature glass filled Nylon low profile case.
· Outputs rated for up to 2.0 amps. For higher current levels, the switch should control a relay.
· Both the normally on and the normally off outputs can be used simultaneously.
· Offers the following output capabilities:
· GM ECM/PCM vehicle speed output frequency to voltage conversion (available in all modes)
· MPH activated switch with Normally Open and Normally Closed ground active outputs.
· Stage/gear shift simulator for boost controllers and other devices that need to see a gear shift
position switch output to change stages, such as:
· AMS-1000 boost controller from NLR Systems
· Innovative Turbo Systems MSBC01 Multi-Stage boost controller
· Outputs have a self protect feature and will turn OFF in case of a short or over current condition.
· Operating voltage range: 9.0 to 16.0 volts.
· Input signal type: PPM square wave 12 volt DC.
· Input signal impedance: 15k Ohm.
· Current draw: less than 0.1 amp plus current draw of device being controlled (when active).
· Warranty: 90 days from date of purchase.