Lingenfelter L950066509 LSA & LS9 Pulley Removal & Install Kit v1.0 - Manual (Page 6)

Page 5.
14. The leading edge of the pulley or hub
should be flush with the end of the jackshaft,
as shown in the image to the left. At this time
you may want to also pin the pulley or hub on
the shaft. Follow the instructions for doing this
found in the LPE pulley instructions.
Lingenfelter Performance Engineering
1557 Winchester Road
Decatur, IN 46733
(260) 724-2552
(260) 724-8761 fax
www.lingenfelter.com
L950066509 LSA & LS9 Pulley Removal & Install Tool Kit v1.0.indd
For additional product installation information and technical support, contact LPE or your LPE
products distributor. You can also find technical support and usage discussions regarding
this product and many other LPE products in our Internet forums:
http://www.lingenfelter.com/LPEforumfiles
13. Place the hub or pulley onto the shaft and
carefully press the part onto the shaft.