Lingenfelter L650500494 Lingenfelter F-Body SuperTube Air Intake 1994-1997 v4.2 User Manual

Page 5

L650500494 F-body SuperTube 1994-1997 installation v4.2.indd

Congratulations - you have completed the installation.

On a stock engine, the LPE air intake system should provide a gain of 10 to 12 horsepower over the

stock factory air intake. On our 440 horsepower 383 CID engine package or other highly modified en-

gines, the LPE air intake can provide an over 25 horsepower gain over the stock system.

WARNING: This air intake system is designed to provide increased air flow and horsepower to stock

as well as heavily modified vehicles. Although the filter has been located in a protected area, it is now

mounted several inches lower than the original filter. In order to avoid possible engine damage, do not

drive through water that is higher than the bottom of the front of the car's body.

Filter service - A filter service kit is available from LPE for cleaning and re-oiling the air filter (part

number SB-88-0005). The correct amount of oil for this filter element is 33 grams (1.16 ounces) of oil.

Replacement filters are also available from LPE (filter part number L660010493). How frequently you

should clean your filter will depend on your driving conditions. LPE recommends checking your filter at

every oil change or 3,000 miles. If there is a build up of dirt as thick as the wire mesh, then LPE recom-

mends you clean your filter. As dirt builds up on your filter, the restriction of the airflow also increases.

Many other items are available from LPE for your vehicle, including low temperature thermostats,

camshafts, CNC ported cylinder heads, engine packages, larger throttle bodies, and port matched intake

manifolds. Contact LPE, visit our web site, or contact your LPE distributor for information about our

many other products.

Page 4 of 4

Lingenfelter Performance Engineering

1557 Winchester Road

Decatur, IN 46733

260-724-2552

260-724-8761 FAX