Lingenfelter L300165297 LPE C5 Corvette Supercharger Turbo Intercooler Reservoir Tank v1.2 - Manual (Page 4)

Page 3.
5. Route the hose from the bottom coolant
reservoir fitting to the intercooler pump inlet and
secure to the bottom reservoir fitting and the
pump using spring clamps or constant tension
clamps.
6. Fill the intercooler reservoir with green
ethylene glycol. Screw on the pressure cap
supplied in the LPE kit (PN: 703-1726). Refer
to figure 1 on page 4 for the boiling points of
different ethylene glycol aqueous solutions at
different pressure levels.
NOTE: LPE recommends using two (2) different
color coolants. One color for the intercooler
system, and the other color coolant for your
engine cooling. This is to differentiate between
the intercooler and the cooling system if a leak
occurs.
7. Screw the supplied pressure cap onto
the intercooler fluid reservoir.
Installation of the LPE intercooler fluid
reservoir kit is now complete.