Lingenfelter L300046006 Lingenfelter C6 Z06 Corvette High Capacity Oil Tank 2006-2008 v1.0 User Manual

Page 4

Page 3.

2. Raise the vehicle with a vehicle hoist or a

jack and jackstands. Be careful to follow the

GM lifting procedures on the Z06 Corvette

due to the aerodynamic components being

easily damaged and the low ride height of the

vehicle.

3. Using a 15 mm socket, remove both drain

plugs from the oil pan to drain the oil.

IMPORTANT: Be sure to have an oil drain

pan to catch the oil.

4. Allow all oil to drain out of the oil pan.

Remove the oil filter by turning it counter

clockwise by hand or using an oil filter

wrench.

5. After all of the oil has drained out, replace the

oil filter with filter part number UPF48R (PN

12626224) and torque the filter to 18lb-ft (25

Nm). Replace both drain plugs and torque

both of them to 18lb-ft (25 Nm).

GM has released a filter with a higher

burst strength for use on the 2009 and

new Z06 and ZR1. LPE recommends the

use of this filter in all Z06 applications.