Lingenfelter L300015297 Lingenfelter LSx Oil Supply Feed Adapter Block v1.2 - Manual (Page 2)

Tools and Materials Needed
• 5 mm Allen wrench/socket adapter
• 16 mm socket or wrench
• 3/16” Allen wrench or Allen wrench/socket adapter
• ratchet wrench
• torque wrench
• thread sealing compound (Loctite Pro Lock™ tight® anaerobic gel, part # 51604 or 51642, or equivalent)
Fits the following GM vehicles:
• 1997-2004 C5 Corvette
• 2005-2009 C6 Corvette
• 2004-2006 Cadillac CTS-V
• 1998-2002 LS1 Camaro and Firebird
• 1999-2007 4.8, 5.3, 6.0 and 6.2L GM CK trucks
• Note: does NOT fit 2004-2006 Pontiac GTO
Installation Instructions:
Clean the block mounting surface area and then install the
supplied gasket and oil feed adapter block. Install the supplied
bolts and tighten the bolts to 106 in-lbs (12 Nm).
Use thread sealing compound on the sensor or sensor plug
threads along with the adapter block bolt threads. If you are using this adapter on a vehicle that does
not have an oil temperature sensor or has the sensor mounted elsewhere, then you should plug the oil
temperature sensor port with the supplied M12 plug and crush washer. If you are not using this adapter
to supply oil to a turbocharger, supercharger or other application then you should plug the 1/8” NPT
port with the supplied fitting.
The oil temperature sensor port plug on the adapter block can be used to add an oil temperature sensor
to vehicles that don’t already have an oil temperature sensor and gauge.
Page 2 of 2
1557 Winchester Road
Decatur, Indiana 46733
260 724 2552 phone
260 724 8761 fax
www.lingenfelter.com
L300015297 LSx block oil supply feed adapter block kit v1.2.indd