Lingenfelter L250150309 Lingenfelter 10 bolt Supercharger Pulley Hub v1.1 - Manual (Page 2)

Page 1.
Parts List
Lingenfelter 10 Bolt Supercharger Pulley Hub Kit (PN: L250150309)
# Description Part number
1 10 bolt hub L220126109
10 Stainless socket head cap screw, M4x0.7x12 47503
1 242 Loctite, 0.5 ml 24205
1 3/16” x 1” dowel pin 98381A510
1 LPE decal LPE-DECAL
1 Instructions N/A
Possible 10 bolt supercharger pulley options
1 Lingenfelter C6 ZR1 LS9 2.35 11 Rib 10 Bolt Pulley L220136109
1 Lingenfelter C6 ZR1 LS9 2.60 11 Rib 10 Bolt Pulley L220146109
1 Lingenfelter CTS-V Camaro ZL1 LSA 2.55 8 Rib 10 Bolt Pulley L220300709
1 Lingenfelter CTS-V Camaro ZL1 LSA 2.35 8 Rib 10 Bolt Pulley L220310709
Tools and materials required
• Flat head screwdriver
• Pulley removal tool
• Mill (or equivalent)
• End mill
• Black marker
• Machine press (or equivalent)
• Allen key set (metric)
This addendum provides instructions for the installation of a ten bolt hub and pulley. This addendum
applies to the installation of a ten bolt supercharger hub and pulley kit on GM LSA (CTS-V and ZL1
Camaro) and LS9 (ZR1 Corvette) equipped vehicles.
Read the entire instruction manual before beginning installation. Many of the stock parts will
be used in reassembly.
Torque value warning - the torque values for the fasteners are provided in metric (Nm) and
then imperial units. For the imperial units some are referenced in lb-ft and others in lb-in. Make
sure you notice the difference and set your torque wrench correctly.
Tools and materials required to pin the hub
(optional operation)
• 3/16” straight flute solid carbide drill bit
• 1/8” carbide (solid or tipped) drill bit
• Drill press
• Hammer
• Punch