LEHR Eco Trimmer - Manual (Page 2)

1.F - HOW TO PRIME THE PROPANE CARBURETOR
1. Remove the air filter cover with a phillips head screw driver.
2. Locate the diaphram vent hole on the side of the carbruretor facing the front of the trimmer.
3. With the propane tank attached, use a paper clip or similar diameter rod to lightly derpress
the diaphram by inserting it into the diaphram vent hole.
4. Depress for 2-3 seconds then pull out.
5. Reinstall the air filter cover and start the engine.
6. If these proceedures do not work, tap the caburetor a couple times with a wrench.
5
DIAPHRAM
VENT HOLE
CARBURETOR
PAPER CLIP
AIR FILTER
BASE PLATE