Fine tuning – Legacy Audio Metro User Manual
Page 15

15
15 
 
 
Fine Tuning
Phase (0 °/-180 °): This control is essential in the proper setup of your subwoofer. If 
not set up properly, your main speakers and subwoofer can actually work against each 
other. If operating out-of- phase the subwoofer and mains will cancel, creating nulls at 
some frequencies (primarily upper bass).What is desirable is to have the subwoofer 
and the mains operating in phase, relative to the primary listening position. Here is an 
effective method of accomplishing this: 
While seated at your listening position, have someone sweep the phase control slowly 
from one extreme to the other. 
Using pink noise or a 50-60 Hz test tone, listen for the strongest output. Now take note 
of that setting. Next, play music program material and optimize the level and phase 
settings further; adjusting for the smoothest output. 
