Laerdal Trauma Make-Up - Manual (Page 3)

Directions for Use:
The kit is used to moulage and to simulate injuries for a
variety of scenarios. Contents of the kit are mixed and
combined to depict the required scenario.
Blood Concentrate – Simulates patient or victim blood
on manikin or person
Baby Powder – Used on manikin or person to simulate
pale skin
Grease Paint – Various colors can be applied or mixed
to depict blood, bruises, wounds, etc.
Knox Gelatin – Can be mixed with Blood Concentrate,
causing it to congeal, simulating congealed blood
Tongue Depressors – Used to apply Modeling and
Putty Wax and/or Grease Paint
Brushes – Used to apply Blood Concentrate and/or
Grease Paint
Atomizer – When filled with water, can be used to
spray on manikin or person to depict perspiration
Modeling and Putty Wax – Use to simulate/enhance
wound creation
Skin Adhesive (not provided) – Can be used to apply
trauma modules, such as #275-00001 BTLS Victim
Injury Set.
Clean-Up:
For heavy application, remove wax, gelatin with tongue
depressor. Then, remove paint, blood concentrate with
soap and water. Do not use acetone or harsh cleaning
chemicals on manikins or skin.
275-10001 3 Laerdal