Laerdal Resusci Anne Simulator - Manual (Page 8)

8
Get Started
Connect blood pressure cuff to arm
Connect external microphone
(not included)
Fill air container
Note
If spontaneous breathing is activated and no chest rise is observed, ensure there is enough air in
the air container. Refill as necessary.
Place blood
pressure cuff
on arm.
Connect clear tubing on
cuff to blood pressure
connector on BP tubing.
Insert connector and
twist to click into place.
Plug microphone into jack
on side of Link Box. Pink
extension cable provided.
Attach air pump hose to
fill valve located on right
side of torso.
Air container is located
inside pelvis.
Detach air pump from
fill valve.
Use manual pump
provided. Do not to
exceed 10 bar (145 psi).