Labconco Rapid Digestor Fume Removal System 2354000 - Manual (Page 6)

INTRODUCTION
6
Specifications
1. Water Requirements
Supply tap water
Demand 2-3 gallons/minute
Connections for eductor 1/2" male (A1/2" x 3/8" nipple is provided
for connection to a regular laboratory
gooseneck faucet.
2. Physical Specifications
Weight (exhaust manifold 5.7 lbs. Model #23500-20 (20 place system)
Including water jet eductor). 7.1 lbs. Model #23500-25 (25 place system)
4 lbs. Model #23540 (4 place system without
Water Jet Eductor).
3. Drain
Drain must be capable of handling 2-3 gallons/minute water flow. Eductor water
outlet must enter into a sink or a laboratory drain and it is recommended that the
eductor drain be located in a fume hood. If location in fume hood is not possible,
refer to layout drawings located on page 8. Water Jet Eductor not included with
Model #23540.