Labconco Total Exhaust Biological Safety Cabinets 34368 Series - Manual (Page 23)

Chapter 3: Getting Started
Product Service 1-800-522-7658 17
Original instructions
10. For chilled applications, the Temp-Zone work area comes with a drain
line installed that can be routed to the cabinet’s drain valve, if desired.
This Temp-Zone drain line installation is optional for chilled
applications should excessive condensation occur under the work
surface. Simply snap in the supplied press-fit elbow to the drain valve
shown in Figure 3-5. Follow the diagram to finish the installation.
Quick-Connect
Elbow Fitting
Circulator
(User-Supplied)
Circulator Tubing
and Insulation Temp-Zone
Optional
Drain Line
Drain Valve
Press-fit
Elbow
Prop Rod
Figure 3-5