LA Audio DA82 - Manual (Page 5)

Page 5
3.0 INSTALLATION
IMPORTANT: PLEASE READ THIS SECTION BEFORE USING THE DA82
3.1 INSPECTION AND UNPACKING
The DA82 has been carefully packed at our factory in a carton designed to withstand handling
in transit.
Should the unit appear to have been damaged in transit, do not discard any of the packing
material and notify the carrier immediately as it is he who is responsible.
The carton should contain -
•
The DA82 unit
• Power cord
• Operator Manual (this book)
If any of the above is missing, notify your supplier immediatly.
3.2 OPERATING ENVIRONMENT
The DA82 is designed to operate between 0 and 50°C (32-122°F) with relative humidity no
more than 80%. Should the unit be installed in an equipment rack, ensure that the environment
conforms to these levels.
Should the unit be installed in an equipment rack, it is important to ensure that the operating
temperature inside the rack does not exceed the upper limit. This could be the case where the
rack contains power amplifiers, a cooling fan may be necassary in such installations.
3.2 POWER REQUIREMENTS
The voltage is normally pre-selected at the factory for the country of destination, a sticker will
indicate the voltage the unit has been set for.
3 versions exist:
230V
110-125V
100V
Ensure that the correct fuse is used
0.1 Amp Quick Blow for 200 - 250V
0.2 Amp Quick Blow for 100 - 125V