Specifications – Krix Atmospherix A20 User Manual
Page 6

6
specifications
warranty
5 years warranty applies to the cabinet and 
speaker.
(Refer to the details on the warranty card 
supplied)
queries
If you have any queries regarding the 
Atmospherix or any other Krix product, please 
contact your nearest Krix dealer or Krix 
directly. Contact details are on the back cover 
of this booklet.
45Hz - 40kHz in room response
20-120 watts RMS recommended amplifier power
90dB for 2.83 volts at 1 metre
5 inch 2-way 
Cast aluminium basket with a nominal 130mm (5”) doped curvilinear 
paper cone. 25mm (1”) voice coil wound on high powered aluminium 
former with copper shorting ring. Vented and double magnet shielded
26mm (1”) dual concentric diaphragm with wave-guide centre plug 
for controlled directivity. Neodymium magnet
2.1kHz
Nominally 8 ohms (minimum 4.9 ohms)
Bass reflex, front vented
295mm diameter x 185mm deep 
247mm 
White (can be painted to match your décor)
Push type connectors
8 litres
2.5kg each
Atmospherix AS
Frequency Range
Power Handling
Sensitivity
Configuration
Bass Driver(s)
Tweeter
Crossover Points
Impedance
Enclosure Type
Dimensions
Mounting cut-out diameter
Finish
Input Terminals
Internal Volume
Weight
