beautypg.com

DTS HDTV MODIX HD-2510 User Manual

Page 16

background image

. Enter '5' to

change the current disk drive and press 'ENTER'.

. Select the drive you want to install and format, in this example disk '2' but note that this

may vary from your setup!

If you can not see the external hard drive at this point, please check your jumper settings,

cable connection, power supply and if required, the driver installation.

For 2.5" Hard Drive, you can also connect the drive directly to your internal IDE

bus if you

encounter problems with the external drive and install it later formatting.

. Choose '1' to

create a primary DOS partition and follow the on screen instructions. After you

have created the partition according to your requirement, close the MS-DOS command
prompt by typing 'exit' and press 'ENTER'.