Konig Electronic Automatic blood pressure monitor - Manual (Page 2)

2
ENGLISH
PARTS AND DISPLAY INDICATORS
ON/OFF
Start
Cuff tubule socket
infl ate to measure
tested one pulse (appears during testing)
defl ate to measure (defl ate air in cuff)
low battery
LCD
Cuff
Rubber tubule
Systolic Diastolic Pulse
PRODUCT DESCRIPTION
Using Oscillometric methodology and silicon integrated pressure sensor technology; blood
pressure and heart rate are measured automatically and non-invasively. The LCD display
visually shows blood pressure and heart pulse rate measurements.
This blood pressure monitor is designed for use with adults and should never be used
with infants or young children, Consult your physician or other health care professional
before use with older children.
SETUP AND OPERATING PROCEDURES
1. BATTERY
LOADING
a. Open the battery cover on the back of the monitor
b. Insert four “AA” size batteries taking care that the “+” and “-” ends of batteries are inserted
correctly.
c. Close the battery cover
d. When the LCD display shows a battery signal, the batteries must be replaced for accurate
readings.
e. Do not use rechargeable batteries because the are not suitable for this product and will cause
inaccurate readings.
f. Remove the batteries if the monitor will not be used for a month or more. This will avoid
damage from leaking batteries.