English – Konig Electronic Wireless microphone system 2 microphones User Manual

Page 4

ENGLISH

Operation

1. Put the antennas straight up for optimal reception.

2. Connect the connection cable with the 6.35 mm plugs to the output of the receiver and

mixer or amplifier. Or connect the receiver with the XLR cable (not included) per channel

(A/B) to a mixer or amplifier.

3. Connect the DC plug of the AC/DC adapter to the DC input on the rear side of the

receiver. Connect the power plug to a wall outlet and switch on the receiver with the

power button.

4. Open the battery compartment of the microphone and place 2x AA batteries according

to the indicated polarity markers.

5. Switch on, after closing the battery compartment, the microphone with the ON/OFF

switch.

6. The system is ready to use.

Specifications
Frequency channel A:

UHF 863.20 MHz

Frequency channel B:

UHF 865.00 MHz

Transmit power:

10 mW

Dynamic range:

>90 dB

Total harmonic distortion:

<0.5%

Frequency response:

40 Hz–15 KHz, ±3 dB

Modulation:

Audio output level:

0–400 mV

Power supply:

230~240 V AC, 17 V DC

Power consumption:

4 W

S/N ratio:

>90 dB

Battery:

2x AA 1.5 V

Battery life:

4~6 hours