Kn-djmixer10, Caution – Konig Electronic 3-channel DJ mixer User Manual

Page 3

CAUTION!

DO NOT OPEN! - RISK OF ELECTRIC SHOCK

Do not open the product to prevent the risk of electric shock. There are no serviceable parts inside.

Servicing by qualified personnel only!

DO NOT EXPOSE TO MOISTURE OR RAIN!

CONNECTING THE MIXER:

This DJ Mixer is equipped with a 12V AC adapter (02).

Make sure the POWER SWITCH (01) is in OFF position before connecting equipment to mixer.

Connect to main amplifier with AMP unbalanced output jacks (03).

There are 2 LINE/PHONO inputs (04) , with the LINE/PHONO button (06) you can set the

input to LINE or PHONO.

When connecting turntables, use GROUND (05) to avoid background noise.

There is 1 CD (LINE) input (07).

Microphone input for 6,35mm (08).

Headphone input is located on the front panel (09).

OPERATION:

Numbers correspond with numbers on drawing

01.

ON/OFF SWITCH

LED (10) will burn when power is ON.

11.

LED MASTER OUTPUT LEVEL METER

For left and right channel

12.

STEREO/MONO SWITCH

For making the overall output signal mono

13.

CHANNEL LEVEL CONTROL

For adjusting the input level for each individual channel

14.

CROSSFADER

Slide switch that allows mixing the signals of channel A and channel B (13).

15.

VOLUME CONTROL

Controls volume on headphone output (03).

16.

Microphone TALKOVER

When this button in ON position, the DJ MIC signal will reduce the volume of the

music. Music volume automatically increases again when there is no signal on the micro

phone.

17.

DJ MIC VOLUME CONTROL

For adjusting volume level of DJ MIC (05)

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

KN-DJMIXER10

DJ MIXER 10 UG 23-05-2006 13:20 Pagina 3

ña

aç

Italiano