Konig Electronic Wireless weather station - Manual (Page 2)

2
ENGLISH
Weather station
• We recommend that you read this manual before installing/using this product.
• Keep this manual in a safe place for future reference.
FEATURES
1. Calendar: 2000 – 2099.
2. Time display: month, day, hour, minute, second, week, moon phase; 12/24 hour switch.
3. Days of the Week: 7 language display.
4. Indoor and outdoor temperature and humidity display.
5. Three kinds of environment indicators: dry, comfortable and damp.
Dry
• Temperature:
N/A
• Humidity: less than 40%
Comfortable
• Temperature: 20 – 28°C
• Humidity: 40 – 70%
Damp
• Temperature:
N/A
• Humidity: >70%
A temperature of less or more than 20 – 28°C and a humidity between 40 – 79% has not been taken
into consideration.
6. Four kinds of weather forecast: sunny, semi-sunny, cloudy, and rainy. The weather forecast
measures the weather condition trends for the next 24 hours. The weather station will give a more
accurate forecast in a naturally ventilated room. It will be more inaccurate in an air-conditioned
room.
7. Alarm and snooze function.
8. Sound control will turn on the backlight.
USAGE:
The weather station has 6 different buttons: TIME, AL, ▲, ▼, CH, SNZ/L. These buttons are used for
the following functions:
1. Adjusting the year, month, date, day and time.
*
Press and hold the TIME button for 3 seconds. When the beep signal goes off, the YEAR digit will
flash. Use ▲ or ▼ on the back of the weather station to adjust the YEAR.
* Press TIME twice. The MONTH digit will flash. Use ▲ or ▼ to adjust the MONTH.
* Press the TIME button again. The DATE digit will flash. Use ▲ or ▼ to adjust the DATE.
* Press the TIME button again. The DAY digits will flash. Use ▲ or ▼ to set the DAY.
* Press the TIME button again. The HOUR digits will flash. Use ▲ or ▼ to set the HOUR.
* Press the TIME button again. The MINUTE digits will flash. Use ▲ or ▼ to set the MINUTE.
* Press the TIME button again. The TIME ZONE 00 digits will flash. Use ▲ or ▼ to set the TIME
ZONE.
* Press the TIME button again to resume to normal display mode.
2. Alarm setup
*
Press and hold the AL button for 3 seconds. When the beep signal goes off, the hour digits will
flash. Use ▲ or ▼ on the back of the weather station to adjust the hour.
* Press the AL button again. The minute digits will flash. Use ▲ or ▼ to set the minutes.
* Press the AL button again to save the setting and to return to normal time display mode.