beautypg.com

Parking brake – Dodge 2007 Charger User Manual

Page 213

background image

PARKING BRAKE

The parking brake should always be applied when the
driver is not in the vehicle.

WARNING!

Never use Park position on an automatic transmis-
sion as a substitute for the parking brake. Always
apply parking brake fully when parked to guard
against vehicle movement and possible injury or
damage.

When parking on a flat surface, place the gear selector in
the P (Park) position first, and then apply the parking
brake.

When parking on a hill, it is important to apply the
parking brake before placing the gear selector in P (Park),
otherwise the load on the transmission locking mecha-
nism may make it difficult to move the selector out of
park. As an added precaution, turn the front wheels
toward the curb on a downhill grade and away from the
curb on an uphill grade.

The foot operated parking brake is positioned below the
lower left corner of the instrument panel. To apply the
parking brake, push the parking brake pedal down and
then remove your foot from the pedal. To release the
parking brake, push down on the parking brake pedal
and then release.

The brake light in the instrument cluster will turn on
when the parking brake is applied and the ignition
switch is on.

Parking Brake

STARTING AND OPERATING

213

5

This manual is related to the following products: