Konig Electronic 2.4 GHz digitaal audio / video system User Manual
Page 4
4
Specifications:
Transmitter:
• Operating frequency band:
2.400 GHz ~ 2.4835 GHz
• Maximum transmit power:
100 mW (wideband data transmission systems)
• Modulation:
16 QAM/QPSK/BPSK
• Video input level:
1 V p-p @ 75 ohm
• Audio input level:
1 V p-p @ 600 ohm (stereo)
• Antenna:
Omni-directional
• IR remote, IR output:
940 nm with on/off keying
• Power consumption:
1.9 W
• Power supply:
5 V/1 A
• Dimensions:
148x99x29 mm
• Weight:
160 g
Receiver:
• Operating frequency band:
2.400 GHz ~ 2.4835 GHz
• Receiver sensitivity:
-80 dB min.
• Video output level:
1 ± 0.2 V p-p @ 75 ohm
• Audio output level:
1 ± 0.2 V p-p @ 600 ohm (stereo)
• Antenna:
Omni-directional
• Power consumption:
1.9 W
• Power supply:
5 V/1 A
• Dimensions:
148x99x29 mm
• Weight:
162 g
System:
• Transmission channels:
80 Channels auto selection
• Video bit rate:
Up to 12 Mbps
• Random ID code:
Up to 4 million sets
• Video resolution:
720x480 @ 30 fps (NTSC) or 768x576 @ 25 fps (PAL)
• Operational range:
Up to 100 meter (line of sight)*
• Remote control range:
Up to 100 meter (line of sight)*
*Actual range depending on environmental conditions
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
from mains and other equipment if a problem should occur. Do not expose the product to water or
moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION