Diamond Audio Technology M331I - M341I - Manual (Page 3)

Parameter (unit)
Sensitivity (2.83V@1m) (dB)
Qts
Fs
(Hz)
Vas (L)
Rdc (ohm)
Xmax (mm/N)
Impedance (ohm)
Power (nom/max) (Watt)
M391i
91.5
0.65
47
31.7
3.2
4.0
4
60/120
M371i
91.0
0.54
47
23.5
3.0
4.0
4
50/100
M361i/M361
91.0
0.46
54
12.9
3.2
4.0
4
50/100
M351i/M351
90.5
0.51
63
8.3
3.5
3.5
4
40/80
M341i
89.5
0.60
80
3.7
3.2
2.5
4
20/40
M331i
88.0
0.66
102
1.4
3.4
2.0
4
15/30
An exclusive and unique feature of the M3 integrated systems is the option to use
separate amplifier channels to power the tweeter and mid-bass driver individually (bi-
amping). This configuration allows an external active crossover to be used, enabling
electronic crossover filter customizations, level matching and phase adjustments.
BI-AMPING
The M3 integrated systems are shipped configured for a single channel per speaker. To
connect a standard single channel input simply connect the + and - wires to the two
exposed terminals.
STANDARD CONNECTION
BI-AMP CONNECTION
THIELE SMALL PARAMETERS
FEATURES
- TEXTURED, CO-POLYMER CONES - micro texture improves high frequency response.
- PROPRIETARY FRAMES - heavy gauge steel for increased stiffness, low resonance.
- BUTYL RUBBER SURROUNDS - impervious to environmental degradation.
- ALUMINUM DOME TWEETERS - smooth audiophile response.
- DIAMOND AUDIO QUALITY - 3 year warranty with authorized dealer installation.
- BI-AMP CAPABLE CROSSOVERS - individually voiced, model specific crossover
topology - configurable for active crossovers.
M3 INTEGRATED SYSTEMS
To power the tweeter
separately from the mid-bass
driver, remove the two leads from the
tweeter terminals and connect the
tweeter amp channel + and - wires
directly to these terminals. To protect the
tweeter in all cases, a passive filter network
consisting of a PTC and a 12dB/oct filter is
always in-line with the tweeter. Bypassing
this filter for special installations is possible,
however it is not recommended and will void
warranty. Please consult your dealer before
attempting this.
To Bi-amp, simply remove these two
connectors and connect tweeter amplifier.