JUGS Sports Combo (2 wheel) Pitching Machine - Manual (Page 16)

Set Up
14
9. Plug heavy-duty, No. 16 gauge three-prong, extension cord into 110-volt
GFCI outlet and connect to short cord on pitching machine. Place the
pitcher’s screen in front of the pitching machine to protect the operator
and the pitching machine from batted balls.
for Poly baseball (Whiffle type only) Use:
Set dials no more that five (5) digits apart. Be sure to reset speed dials 35
digits apart before use with baseballs.
WARNING: Leg and Base T-Clamps must always be tightened securely
before throwing pitches. All lock knobs must also be
tightened firmly before using the pitching machine.
DANGER: Do not throw pitches without the correct size ball feed chute
assembly properly secured.
Setup for Tennis Use:
Tennis balls can be thrown by this machine. Follow setup instructions
as outlined above in “Setup for Baseball Use.” However, you must first
inflate the tires to a pressure of 25 pounds per square inch (psi). Be sure
to deflate tires to 16-17 pounds for baseball use and reset the speed dials
35 digits apart before using baseballs.
IMPORTANT NOTE:
See page 24 under “Operation: Tennis Balls” for tennis ball settings bEfORE
using this machine with tennis balls.