JUGS Sports MVP Baseball (1 wheel) Pitching Machine - Manual (Page 13)

• To move the pitching machine, slowly tip it over until the tire rests on the
ground. Grasp and lift it by two legs and roll it on the tire to the new position as
you would a wheelbarrow. The JUGS pitching machine will fit in the trunk of a
car by removing its legs.
• Do not roll the tire on surfaces that might damage the tire. If the tire becomes
deformed, flat, or damaged, it must be repaired before using the machine. (See
tire specifications, Page 18.)
WARNING: Never leave pitching machine unattended.
IMPORTANT:
Always set up the pitching machine so that the two legs are positioned in front,
facing the pitching screen and batter, and one leg facing back toward the operator.
6. Plug heavy-duty, No.16 gauge three-prong, extension cord into 110-volt GFCI
outlet and connect to short cord on pitching machine. Place the pitcher’s
screen in front of the pitching machine to protect the operator and the pitching
machine from batted balls.
! WARNING: All T-clamps must be tightened securely before using the
pitching machine and throwing pitches.
12
Transporting