JUGS Sports PS50 Pitching Machine - Manual (Page 14)

12
Terminology
Curved Leg
Quick-Snap Button Hole
Quick-Snap Button Hole
Hex Bolt Hole
Hex Bolt Hole
Flaired End
Curved End
Straight Leg
PS50 baseball Leg Assembly:
Insert straight end of curved leg into flaired end of straight leg . Line up hex bolt
holes and insert 1/2" hex bolt through the hex bolt hole . Thread hex nut onto bolt
and tighten . Place crutch tip on curved end of the joined leg assembly . Slide open
end of leg assembly onto leg base until Quick-Snap button engages Quick-Snap
button hole . Repeat for other legs (See figure 3 for proper assembly) .
PS50 Softball Leg Assembly:
Slide curved end of curved leg onto leg base until Quick-Snap button engages
Quick-Snap button hole . Place crutch tip on straight end of curved leg . Repeat for
other legs (See figure 4 for proper assembly) .
Straight End