Imaxrc B610-PRO - Manual (Page 10)

Load Data program
17 18
This program calls back the data that was stored at 'Save Data'program.
To load the data,press Star/Enter key once to blink the data number field and select the
number using INC> or key then press Star/Enter key for more than 3 seconds.
Select the data number to be called back.
The data matched with the number will be
displayed.
Loading the data.
Various information during the process
Various information during the process
You can inquire various information on LCD screen during charging or discharging
process.when you press button the charger shows the establishment of user
settings.And also you can monitor the voltage of individual cell by pressing INC> button
when the individual connection cable is linked to the Lithium battery being processed.
The final voltage will be reached at the end of
process.
The internal temperature of the charger and the
temperature of battery being charged.
(The external temperature only will be displayed
when the temperature probe is used.)
The present voltage of input DC power.
Temp Cut-Off
OFF 80C
Ext.Temp 26C
Int.Temp 30C
IN Power Voltage
12.56V
END VOLTAGE
12.6V(3S)
PROGRAM SELECT
LOAD DATA
LOAD [01] NiMH
14.4V 3000mAh
Capacity Cut-Off
ON 5000mAh
Safety Timer
ON 200min
LOAD...