HITEC Easy Glider Pro - Manual (Page 11)

11
EasyGlider PRO KIT # 21 4226
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you
are completely satisfied with the contents of your kit. However, we would ask you to check all the parts (referring to the Parts List)
before you start construction, as we cannot exchange components which you have already worked on. If you find any part is
not acceptable for any reason, we will gladly correct the defect or replace the item in question once we have inspected it. Please
send the part to our Model Department, being sure to include the purchase receipt and a brief description of the fault.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in
terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we
cannot entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating them safely
requires a certain level of technical competence and manual skill, together with discipline and a responsible attitude at the
flying field. Errors and carelessness in building and flying the model can result in serious personal injury and damage to
property. Since we, as manufacturers, have no control over the construction, maintenance and operation of our products,
we are obliged to take this opportunity to point out these hazards and to emphasise your personal responsibility.
Additional items required for the EasyGlider PRO:
Adhesive and activator:
Use medium-viscosity cyano-acrylate glue (“cyano” - not styrofoam cyano) for this model. Epoxy adhesives produce what initially
appears to be a sound joint, but the bond is only superficial, and the hard resin breaks away from the parts under load.
Hot-melt glue (from a glue gun) is a useful alternative adhesive.
MULTIPLEX radio control system components for EasyGlider PRO:
RX-7-SYNTH receiver
35 MHz e.g. A-band Order No. 5 5880
alternatively 40 MHz Order No. 5 5882
or
Micro IPD UNI receiver
35 MHz e.g. A-band Order No. 5 5971
alternatively 40 MHz Order No. 5 5972
Tiny-S UNI servo (2 x required) Elevator / rudder Order No. 6 5121
Nano-S UNI servo (2 x required) 2 x aileron Order No. 6 5120
Extension lead, 400 mm UNI Aileron servo, 2 x Order No. 8 5029
optional: separation filter lead, 200 mm UNI Aileron servo, 2 x Order No. 8 5035
Battery charger:
MULTIcharger LN-3008 EQU
Order No. 9 2540
For LiPo, LiIo and LiFe batteries with 2S or 3S cells, and NiMH and NiCd batteries with 4 to 8 cells.
EasyGlider PRO power set Order No. 33 2636
Contents: Motor - Himax 2816 - 1220, speed controller- BL-27 II, 10” x 6” propeller, collet adaptor, propeller driver, spinner
EasyGlider PRO tuning power set Best.-Nr. 33 2642
Inhalt:
Motor - Himax 3516 - 1130, Regler - BL -37 II, Luftschraube 12x6, Spannzange, Mitnehmer, Spinner
Flight battery Li-BATT BX-2100 mAh 2/1 2100 Order No. 15 7130
Li-BATT BX-2500 mAh 2/1 2500 Order No. 15 7190
Li-BATT BX-3200 mAh 2/1 3200 Order No. 15 7135
Propeller driver and spinner for EasyGlider PRO Order No. 73 3500
Additional items required for the glider variant only
NiMH receiver battery, 4 / 1800 mAh
Order No. 15 6007
Mini switch harness with charge socket Order No. 8 5045
Aero-tow release Order No. 72 3470
Tools:
Scissors, balsa knife, side-cutters.
Note: remove the illustration pages from the centre of the building instructions.
Specification: Glider Electric glider
Wingspan 1800 mm 1800 mm
Overall length 1110 mm 1110 mm
All-up weight approx. 710 g with standard power system approx. 810 g
Wing area, FAI approx. 41.6 dm² FAI approx. 41.6 dm²
Wing loading approx. 17 g / dm² approx. 20 g / dm²
RC functions Elevator, rudder, aileron as glider, plus throttle
GB