HITEC DogFighter - Manual (Page 14)

14
Examine your kit carefully!
MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope
that you are completely satisfied with the contents of your kit. However, we would ask you to check all the parts before
you start construction, referring to the Parts List, as we cannot exchange components which you have already
modified. If you find any part is not acceptable for any reason, we will readily correct or exchange it once we have
examined the faulty component. Just send the offending part to our Model Department, with adequate postage pre-paid.
Please be sure to include the enclosed complaint form, duly completed.
We are constantly working on improving our models, and for this reason we must reserve the right to change the kit
contents in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please
understand that we cannot entertain claims against us if the kit contents do not agree in every respect with the instructions
and the illustrations.
Caution!
Radio-controlled models, and especially model aircraft, are by no means playthings in the usual sense of the
term. Building and operating them safely requires a certain level of technical competence and manual skill,
together with discipline and a responsible attitude at the flying field. Errors and carelessness in building and
flying the model can result in serious personal injury and damage to property. Since we, as manufacturers,
have no control over the construction, maintenance and operation of our products, we are obliged to take this
opportunity to point out these hazards and to emphasise your personal responsibility.
Airborne RC components:
Recommended equipment:
MULTIPLEX receiver, min. RX 5 light M-LINK
Order No. 5 5808
or RX 7 light M-LINK Order No. 5 5810
MULTIPLEX RX-6 light receiver, 35 MHz A-/B-band Order No. 5 5876
Alternatively: 40/41 MHz Order No. 5 5877
Three Nano-S servos (ailerons + elevator) Order No. 6 5120
Optional: one additional Nano-S servo Order No. 6 5120
(for rudder)
Two 15 cm servo extension leads
Order No. 8 5019
Power set:
“DogFighter” Tuning power set
Order No. 33 2656
incl. brushless motor, speed controller, propeller,
driver and accessories.
Power set:
“DogFighter” ULTRA Speed power set
Order No. 33 2657
incl. brushless motor, speed controller, propeller,
driver and accessories.
Folding Prop Sets:
Folding Prop Set Dogfighter TUNING
Order No 33 2580
Folding Prop Set Dogfighter ULTRA Order No. 33 2581
Recommended flight battery:
Li-BATT FX 3/1-2200 (M6), 102 x 35 x 26.5 mm
Order No. 15 7351
Adhesives: Zacki ELAPOR ® 20g Order No. 59 2727
Zacki ELAPOR ® Super liquid 10g Order No. 59 2728
Specification:
Wingspan
882 mm
Overall length 812 mm
All-up weight approx. 850 g
Wing area 19.07 dm²
Wing loading min. 34 g/dm²
RC functions Aileron, elevator, throttle, optional rudder
GB
Order No. 21 4245